Every critical zone,
documented. Automatically.
SecLive turns your aeronautical facility cameras into active quality and safety sensors. Automatic non-compliance detection, visual procedure traceability and audit-ready documentation. No new hardware.
In aeronautics,
an undocumented error is a certifiable risk.
Aeronautical facilities operate under the world's most demanding quality standards. A procedure non-compliance, a missing PPE or an unauthorised access to a critical zone can lead to non-conformities, line stoppages or compromise aircraft airworthiness.
The problem isn't a lack of cameras — it's that cameras don't analyse, alert or document automatically.
PPE not worn in critical zones
In hangars and maintenance lines, manual supervision at scale is impossible. SecLive detects missing helmets, vests and gloves in real time.
Unauthorised access to FOD and restricted areas
Unauthorised personnel in engine, cockpit or runway areas can compromise operational safety. Immediate alert before the incident occurs.
MRO procedures without visual traceability
Work orders document what was done, but not how or by whom. SecLive adds automatic visual traceability to every intervention.
Quality reports that consume team hours
Documentation for AS9100 and EASA audits is generated manually, slowly and prone to error. SecLive produces it automatically at shift close.
What SecLive detects and documents in your facility
Specialised AI models for aeronautical environments that act in the moment, without human intervention.
Operational in 48 hours.
Without stopping operations.
Connect to existing cameras
SecLive connects to any installed CCTV, NVR or VMS system. Compatible with 300+ manufacturers. No construction or replacements.
Configure AI models per zone
We assign specific models to each camera by zone type: MRO line, hangar, access points, runway. Thresholds tuned to your operation.
Unified dashboard and real-time alerts
Dashboard with all active cameras, push alerts to quality and operations teams, and automatic logging of every incident with image and timestamp.
Automatic shift report
At the end of each shift, the system generates the complete report: incidents, PPE compliance, access log, MRO traceability and quality KPIs.
Camera detects anomaly
Missing PPE on maintenance technician — engine zone — night shift.
Alert in <1 second
Push to shift supervisor with image, zone and incident type.
Automatic record
Image, timestamp, camera and corrective action linked to the work order.
Documented shift close
AS9100 report automatically generated. Zero manual work for the quality team.
Two responsibilities.
One single platform.
Quality and Operations have different challenges in aeronautics. SecLive solves them from the same dashboard.
Zero non-conformities without manual audits
- Automatic visual traceability of every MRO intervention
- Documentation ready for AS9100, EASA Part 145 and EN 9110
- Incident log with image, timestamp and corrective action
- Dramatic reduction in audit preparation time
- Objective evidence for regulatory bodies (AESA, EASA)
Full facility control without expanding headcount
- Real-time supervision of hangars, lines and access points
- Automatic alerts that eliminate dependence on physical supervision
- FOD detection in critical zones before it causes incidents
- Shift reports automatically generated at handover
- Integration on the already installed camera infrastructure
SecLive documents
what regulations require
The aeronautical sector operates under the world's most demanding quality standards. SecLive automatically generates the documentary evidence you need.
AS9100 Rev D
Quality management standard for the aerospace industry. SecLive provides continuous visual traceability and automatic non-conformity records.
EASA Part 145
European regulation for approved maintenance organisations. SecLive documents procedures, PPE and access with auditable image and timestamp.
EN 9110
Quality management system requirements for aeronautical maintenance organisations. Automatic visual traceability of every intervention.
100% local processing. No cloud data. GDPR compliant and applicable aeronautical sector data protection regulation.
Request atechnical demo
We show you live how SecLive works on your current camera infrastructure. No prior installation, no purchase commitment.
Demo in your real environment
We configure the demo with your facility specs: camera type, priority zones and applicable standards.
ROI proposal included
Estimate of non-conformity reduction, audit time savings and regulatory compliance improvement for your organisation.
100% confidential process
Your facility data never leaves the evaluation process. No commercial pressure.
Response within 24 hours
Our technical team will contact you to schedule the demo at the best time for you.
Request technical demo
Tell us about your facility and we'll show you how SecLive fits.
No commitment · Response within 24h · Your data is secure
Every critical zone, documented.
Automatically.
Request a technical demo and we'll show you live how SecLive detects, documents and alerts in your aeronautical facility.
No commitment · 24h response · Data in your infrastructure · A product by Secmotic Innovation S.L.